Thielenhaus Microfinish | Microfinish-attachments for lathes

Tape finish and stone finish devices

Microfinish attachment devices provide you with the option to cost-effectively apply precision machining methods to individual parts, small batches and prototypes using an existing supporting machine, e.g. a lathe or grinding machine, and thus to achieve high-quality surfaces and geometric improvements on gear shafts, rolls or piston rods, for example.

USE YOUR EXISTING MACHINES FOR SUPERFINISH OPERATIONS

Microfinish attachment devices offer the possibility of carrying out quality-improving or structuring precision surface-machining operations cost-effectively on a lathe. Once the work piece has been hard turned, the attachment device is clamped onto the supporting machine and the Microfinish machining is carried out as a final operation. This process step can also be done directly after hardening, so that a lathe equipped in this way functions as a Microfinish machine for individual parts or small lots. 

The work piece is rotated and the attachment device is operated via the supporting machine, while the oscillation of the tool and the contact pressure are regulated by the control unit of the attachment device. Depending on the device, the oscillation frequency can be up to 2,000 double strokes per minute. All rotationally symmetrical work pieces of any hardness that can be fixed between spikes can be processed this way. Even big calendar rollers in the paper, textile and plastics industries can be finished with the devices in their installed state and thus reconditioned.

Kontakt

Your Contact:

USA

Thielenhaus Sales Department
Phone: +1 248-347-1611

Thank you a lot for your message!
Your contact: Thielenhaus Sales

Data protection: The data requested in this form will only be used to contact you. It will never be disclosed or sold to third parties. Additional technical user data (such as IP address, browser, screen resolution, operating system, etc.) are not being recorded using this form. For more information about privacy, please visit our Privacy Policy .

Mandatory fields: Fields marked with * are mandatory.
Please enter your name!
Please enter your company's address!
Please enter your email!
Please enter your company's name!
Please enter your phone number!
Select files...

China

Yuanyuan Xie (Susanne)
+86 21 6775 3158

Thank you a lot for your message!
Your contact: Yuanyuan Xie (Susanne)

Data protection: The data requested in this form will only be used to contact you. It will never be disclosed or sold to third parties. Additional technical user data (such as IP address, browser, screen resolution, operating system, etc.) are not being recorded using this form. For more information about privacy, please visit our Privacy Policy .

Mandatory fields: Fields marked with * are mandatory.
Please enter your name!
Please enter your company's address!
Please enter your email!
Please enter your company's name!
Please enter your phone number!
Select files...

India

K. Krishna Kumar
Tel: +91 80 23725333
Mobile: +91 8056073311

Thank you a lot for your Message!
Your contact: K. Krishna Kumar

Data protection: The data requested in this form will only be used to contact you. It will never be disclosed or sold to third parties. Additional technical user data (such as IP address, browser, screen resolution, operating system, etc.) are not being recorded using this form. For more information about privacy, please visit our Privacy Policy .

Mandatory fields: Fields marked with * are mandatory.
Please enter your name!
Please enter your company's address!
Please enter your email!
Please enter your company's name!
Please enter your phone number!
Select files...

Tape Finisher SL50

TECHNICAL DATA

Oscillation frequency: 300 – 1400 double strokes per minute
Oscillation path: standard +/- 1 mm, optional +/- 0.5; +/- 1.5; +/- 2 mm
Tape feed rate: 10 – 100 mm/min
Contact stroke: 30 mm, optional 40 mm
Contact pressure: 50-300 N 1-6 bar)
Tape contact roller width: max 50 mm
Tape contact roller hardness: Standard 65 ShA, optional 35, 50, 90 ShA
Control voltage: 24 VDC
Weight: 13,2 kg


Power / Air Supply

Elektric: 100 – 260 VAC, 50/60 Hz, 6 A (L, N, PE)
Pneumatic: 1 x 6 bar


OPTIONS

  • Direct integration into machine with sensors
  • Single-side mounted tape contact roller
  • Special tape contact roller
260 VAC, 50/60 Hz, 6 A (L, N, PE)

TAPE FINISHER SL100

TECHNICAL DATA

Oscillation frequency: 300 – 1400 double strokes per minute
Oscillation path: +/-2 mm (up to max. +/- 3 mm)
Tape feed rate: 0 – 150 mm/min
Contact stroke: 30 mm
Contact pressure: max. 700 N
Tape contact roller width: 100 mm (150 mm)
Tape contact roller hardness: 35, 50, 65, 80 ShA
Control voltage: 24 VDC
Weight: 38 kg

CONNECTIONS
Elektric: 230V/50Hz
Pneumatic: max. 0,7 bar

OPTIONS

  • Control cabinet: Operation and regulation on device

Tape Finisher KG50

Technical Data

Oscillation frequency: 300 – 1,400 double strokes per minute
Oscillation path: Standard +/- 1 mm, optional +/- 0.5; +/- 1.5; +/- 2 mm
Tape feed rate: 10 – 100 mm/min
Contact stroke: Standard 40 mm, optional 70, 100 mm
Contact pressure: 50 – 300 N (1 – 6 bar)
Tape contact roller width: max. 50 mm, single-side mounted
Tape contact roller hardness: Standard 65 ShA, optional 35, 50, 90 ShA
Control voltage: 24 VDC
Weight: 14.5

CONNECTIONS

Electric: 100 – 260 VAC, 50/60 Hz, 6 A (L, N, PE)
Pneumatic: 1 x 6 bar

OPTIONS

  • Various control sensors
  • Special tape contact rollers

TAPE FINISHER KG50-DB

Technical Data

Oscillation frequency: 300 – 1,400 double strokes per minute
Oscillation path: Standard +/- 1 mm, optional +/- 0.5; +/- 1.5; +/- 2 mm
Tape feed rate: 10 – 100 mm/min, 2 x 10 – 100 mm/min
Contact stroke: Standard 40 mm, optional 70, 100 mm
Contact pressure: 50 – 300 N (1 – 6 bar)
Tape contact roller width: 2 x 25 mm, double-side mounted
Tape contact roller hardness: Standard 65 ShA, optional 35, 50, 90 ShA
Control voltage: 24 VDC
Weight: 14.5 / 16.5 kg 

CONNECTIONS

Electric: 100 – 260 VAC, 50/60 Hz, 6 A (L, N, PE)
Pneumatic: 1 x 6 bar / 2 x 6 bar

OPTIONS

  • Clamping cylinder for vertical integration into machines
  • Various control sensors
  • Special tape contact rollers

Tape Finisher KG100

Technical Data

Oscillation frequency: 300 – 2,000 double strokes per minute
Oscillation path: Standard +/- 0 - 2,5 mm
Tape feed rate: 10 – 100 mm/min
Contact stroke: Standard 40 mm, optional 70, 100 mm
Contact pressure: 300 – 1,800 N (1 – 6 bar), 
Tape contact roller width: 100 mm, double-side mounted
Tape contact roller hardness: Standard 65 ShA, optional 35, 50, 90 ShA
Control voltage: 24 VDC
Weight: 38 kg

CONNECTIONS

Electric: 100 – 260 VAC, 50/60 Hz, 6 A (L, N, PE)
Pneumatic: 1 x 6 bar

OPTIONS

  • Direct integration into machine with sensors
  • Special tape contact rollers

Stone Finisher SF70

TECHNISCHE DATEN

Oscillation frequency: 300 – 2,000 double strokes per minute
Oscillation path: Standard +/- 1 mm, optional +/- 0.5; +/- 1.5; +/- 2 mm
Contact stroke: Standard 40 mm, optional 70, 100 mm
Contact pressure: 80 – 480 N (1 – 6 bar)
Stone width: max. 70 mm
Stone heights: 3 – 28 mm, clampable
Control voltage: 24 VDC
Weight: 9.3 kg

CONNECTIONS
Elektric: 100 – 260 VAC, 50/60 Hz, 6 A (L, N, PE)
Pneumatic: 1 x 6 bar

OPTIONEN

  • Direct integration into machine with sensors
  • Special stone-holders

Downloads

Machines and Microfinish Attachment Devices (PDF)

download brochure button de

In order to optimize our website for you and to be able to continuously improve it, we use cookies. By continuing to use the website, you agree to the use of cookies.
Further information on cookies can be found in our privacy policy.