HyperFinish® is a further development of Microfinish / Superfinish machining technology which can be used to overlay conventional tool oscillation with a secondary, high-frequency tool oscillation (in some cases 3,600 double strokes per minute [60 Hz]). HyperFinish® is available for the BearingStar platform, amongst others.
With the innovative HyperFinish® technology from Thielenhaus, NC-Servo oscillation (Direct Drive) is operated with an overlaid, high-frequency oscillation. Thanks to the high-frequency tool oscillation, users are able to achieve a significantly higher rate of material removal and up to 35% shorter machining times. The geometry – particularly the transverse profile and the roundness of the raceway – also benefits from this process. With the assistance of the direct drive motor, the oscillation angle, oscillation frequency and pressure angle can be programmed, resulting in a reduction in set-up times.
Microfinish / Superfinish of roller bearing raceways: Up to 35% shorter machining times and an improved geometry of raceway transverse profiles, beneficial for raceways for both anti-friction and roller bearings, particularly advantageous for raceways for four-point roller bearings.
Deburring of drill holes: Shorter machining times, a more even edge rounding, can completely replace high-pressure water deburring in some cases.
| Work piece: | Tapered roller bearing inner ring, 50 mm bore hole |
| Target: | Ra 0.05 |
| Machining time with conventional Microfinish / Superfinish: | 25 seconds |
| Machining time with HyperFinish®: | 20 seconds For measurement results please click on graphic |
HyperFinish product brochure (PDF）
coming soon!
Thielenhaus Sales Department
Phone: +1 248-347-1611
Creative Contact Form: There is nothing to show!
